Wintermute User Guide - commands:midi_commands

midi_attachtimer

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_attachtimer: | Attaches a MIDI port to a zone timer – MIDI port will output 25FPS MTC when the timer is running * alias is optional – if present, sets the port to output MTC from; in its absence, the default is used * zone

midi_list

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_list: in/out Lists all the input or output devices present on the system to the System Log * in/out determines which direction of MIDI device is listed.

midi_lxmsc

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_lxmsc: | | | Sends an MSC command formatted for a lighting desk. “cue” and “list” fields are always required but ignored when not used by the command. * alias is optional – in its absence, the default device is used

midi_macroadd

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_macroadd: | | :: Adds a command to the named macro on the given midi in port. * alias is the alias given to the port when it was opened; it is not optional. The default midi in port can be addressed as wm_default

midi_macroclear

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_macroclear: | Clears the named macro from the given midi in port; if no macro is named, all macros are cleared from that port. * alias is the alias given to the port when it was opened; it is not optional. The default midi in port can be addressed as

midi_macrocreate

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_macrocreate: | | Creates a macro on the given midi in port. * alias is the alias given to the port when it was opened; it is not optional. The default midi in port can be addressed as wm_default * macro is the name of the macro to be created - this is how it will be referred to in Wintermute

midi_noteoff

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_noteoff: | | | Sends a MIDI note off * alias is optional – in its absence, the default device is used * channel is the MIDI channel * note is the MIDI note number * vel is the velocity of the note

midi_noteon

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_noteon: | | | Sends a MIDI note on * alias is optional – in its absence, the default device is used * channel is the MIDI channel * note is the MIDI note number * vel is the velocity of the note

midi_open

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_open: | Opens the named MIDI device for output * alias is optional – in its absence, the device is opened as the default * device is the name of the device to open

midi_openin

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_openin: | Opens the named MIDI device for input * alias is optional – in its absence, the device is opened as the default * device is the name of the device to open

midi_sysex

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

midi_sysex: | Sends MIDI Sysex * alias is optional – in its absence, the default device is used * hex is the Sysex command written in hex pairs with a space between each pair. The Sysex terminator (F7) is required

start

Anonymous (anonymous@undisclosed.example.com) — 2025-05-17T20:51:57+00:00

MIDI Setup: * midi_open * midi_openin * midi_list MIDI Output: * midi_lxmsc * midi_noteon * midi_noteoff * midi_sysex * midi_attachtimer MIDI Input: * midi_macrocreate * midi_macroadd * midi_macroclear