commands:flow_commands:flow_tryadvance
flow_tryadvance: test/live :: <command if success> :: <command if fail>
Will attempt to advance the entire flow, testing against the flow conditions for all show zones; and running the attached commands depending on the result of the test. Running with a “test” flag will only run the test and the commends, “live” will also do the advance.
- test/live are flags that sets the behaviour of the test as above - only one should be used
- command if success is the command to be run if the test passes
- command if fail is optional and will be run if the test fails (optional)
Note that there is no “wait” option for this command - it must be triggered directly
commands/flow_commands/flow_tryadvance.txt · Last modified: 2024/09/20 07:47 by 127.0.0.1